Fina Cart and Kit

[BigDrip]

If I ordered a Finaplix 10 dose Cart:
1 Box containing,
- 10 Cartridges per Box containing,
- 10 Implants per Cartridge containing,
- 10 small pellets per implant

Do I need a 2g, 4g, 6g, or 10g kit to make it. I've done it about 2 years ago, but forgot which one I ordered. I want it at 75mg/ml or so.

I would appriciate the help.

BigDrip

[regino007]

You might have a better response in the tren forum. I personally bought 2 carts and used the 4g kit. Good luck bro.........

[Goanna]

You will need a 20g kit for the whole box, but are you really going to use all of it quickly?

I would say to convert enough for one or two cycles, andf leave the rest in the cartridges in a cool dry place. When you start running low, you can convert the rest. The tren will keep better in the pellet form then it would in an oil based solution.

[erokyrwrld]

Each cart contains 2g of tren. So 10carts X 2g = 20g kit. You need a 20g kit, which isn't made. Two 10g carts will yield 200ml @ 100mg/ml. Your best bet is to convert half and store the other 5 carts in a cool dry place.

---

Basically, each cart requires a 2g kit. Do your measurements based on this.

[ironsensei]

I use acetone to seperate mine, so I will scape the dried product out of my ceramic bowl and (I bought a scale last time) weight it and calculate off of that with the amount of oil I add. This way I am 100% sure what my dosage is. I think I'm the only one, but I don't use any BA or anything else, keeps things simple.
good luck.

[RacerXHGH]

1 pellet = 20 milligrams
1 cart = 100 pellets = 2grams
5 carts = 500 pellets = 10 grams
1 box = 10 carts = 1000 pellets = 20 grams

[BigDrip]

Thanks bro's, that's the info that I needed.